This is included
– 1x Beamlight UV400 safety glasses
– Even with safety glasses, direct eye contact with the UV light should always be avoided!
– 1x Beamlight UV400 safety glasses
– Even with safety glasses, direct eye contact with the UV light should always be avoided!
– safe & tested
– Easy removal with normal remover
– Removal of outgrown lashes as usual with tweezers
– up to 8 out of 10 former allergy customers no longer react
– Wavelength: 395nm
– 5W / 1A / 5V
– Flexible gooseneck Length: 70cm
– Length the stand underneath: 109cm
– Diameter base: 19cm
With our Beamlight S6 UV LED lamp you can cure a special lash glue using UV light. You place artificial lash on natural lash as usual – operate the light with the foot pedal and after max. 2 seconds, the lash glue is completely cured.
Pictures say more than words: curing within 1 – 2 seconds – extreme hold that no classic lash glue will ever achieve. No residual fumes after the curing process. Lasts until the failure of the natural lashes.
âś… Water is allowed IMMEDIATELY to the lashes
âś… No 48h rule anymore
âś… No bonder or sealer needed anymore
âś… completely transparent
âś… almost no fumes at all
âś… Up to 80% success rate with allergy customers
âś… Humidity no longer plays a role
âś… Temperature no longer plays a role
âś… Seasons no longer play a role
âś… Cures within 1-2 sec. Completely off
Sounds like a miracle? It is!
âś… Flexible adjustable gooseneck
âś… latest LED technology
âś… Light activation with foot pedal
âś… High-quality, stable stand
You can easily position your Beamlight System S6 lamp right next to your treatment table and bend the ultra-flexible gooseneck the way you want. The distance from the lamp head to the lashes is about 10-15cm.
You dip an lash into the glue, place it on a separated natural lash and press the foot pedal. After 1-2 seconds, the glue is 100% cured and you can move on to the next lash.
Our months of testing show that. But why is that? Quite simply, two substances are always responsible for almost all allergies:
Cyanoacrylate OR Carbon Black, black dye.
Our lash glue is transparent – Carbon Black is completely eliminated as a cause of allergy.
Due to the fact that the lash glue hardens 100% immediately, all fumes are eliminated directly. Classic lash glue, on the other hand, require up to 48 hours to dry completely.
During this period, they continue to release fumes – an allergy develops.
âś… detailed manual
âś… Incl. Assembly instruction
âś… Incl. detailed explanation of all steps
You will receive a detailed instruction manual from us, which will explain everything to you.
As a trained lash stylist, you will get used to the system within minutes and can start treating your clients with the Beamlight S6 system in no time.
Think: How many customers have you already lost because one of the following scenarios occurred?
❌ glued lashes
❌ High failure
❌ allergic reaction
❌ long treatment duration
❌ Glue problems in summer
❌ high costs due to glues & bonders
❌ Cost of removal
All this is almost impossible with the Beamlight S6.
The UV LED lash curing method will completely change the lash industry in the coming months. Customers have already learned about the numerous benefits and are actively looking for studios that offer our new method. If you wait too long, you miss out on the potential and lose customers to the competition.
Our system is absolutely safe for you and your clients because there is no direct eye contact with the light. To eliminate any risk, we deliver our systems with certified UV400 safety glasses. By the way, you can also wear these over your own glasses without any problems.
Did you know? Before being launched on the market, our system went through dozens of tests and was successfully tested on hundreds of customers in our own beauty salons.
With the Beamlight S6 system you work super comfortable and faster than before. You trigger the light comfortably with a foot pedal. Due to the immediate hardening of the glue, you can go directly to the next natural lash and at the same time you are 100% sure that there is no glueing.
âś… Higher-quality work
âś… No glueings
âś… significant reduction in treatment time
The Beamlight S6 system has a intentionally slim design. The stable base takes up little space and integrates perfectly into your workspace without getting in your way.
All the typical problems you had before as a lash stylist are now a thing of the past.
âś… Change glue dot? Every few hrs!
âś… Glue pulls threads? Never again!
âś… Strong fumes? Never!
âś… High glue consumption? Past!
âś… Spend money on bonders? Never again!
Pictures say more than words: curing within 1 – 2 seconds – extreme hold that no classic lash glue will ever achieve. No residual fumes after the curing process. Lasts until the failure of the natural lashes.
âś… Water is allowed IMMEDIATELY to the lashes
âś… No 48h rule anymore
âś… no bonder or sealer needed anymore
âś… completely transparent
âś… almost no fumes at all
1. Dip into the glue
2. Put on the natural lash
3. Trigger UV light
4. Wait 1-2 sec.
5. You can directly start with the next lash – without accidentally glueing them together.
âś… Up to 80% success rate with allergy customers
âś… Humidity no longer plays a role
âś… Temperature no longer plays a role
âś… Seasons no longer play a role
âś… Cures completely within 1-2 seconds
Sounds like a miracle? It is!
âś… Flexible adjustable gooseneck
âś… latest LED technology
âś… Light activation with foot pedal
âś… High-quality, stable stand
You can easily position your Beamlight System S6 lamp right next to your treatment table and bend the ultra-flexible gooseneck the way you want. The distance from the lamp head to the lashes is about 10-15cm.
You dip an lash into the glue, place it on a separated natural lash and press the foot pedal. After 1-2 seconds, the glues is 100% cured and you can move on to the next lash.
Our months of testing show that. But why is that? Quite simply, two substances are always responsible for almost all allergies:
Cyanoacrylate OR Carbon Black, black dye.
Our lash glue is transparent – Carbon Black is completely eliminated as a cause of allergy.
Due to the fact that the lash glue hardens 100% immediately, all fumes are eliminated directly. Classic lash glue, on the other hand, require up to 48 hours to dry completely.
During this period, they continue to release fumes – an allergy develops.
âś… detailed manual
âś… Incl. Assembly instruction
âś… Incl. detailed explanation of all steps
You will receive a detailed instruction manual from us, which will explain everything to you.
As a trained lash stylist, you will get used to the system within minutes and can start treating your clients with the Beamlight S6 system in no time.
The system is shipped directly from our warehouse in Hamburg and is securely packed. The setup takes only a few minutes and your workstation is ready in no time, so that you can inspire your first customer with your new Beamlight UV LED system.
Think: How many customers have you already lost because one of the following scenarios occurred?
❌ glued lashes
❌ High failure
❌ allergic reaction
❌ long treatment duration
❌ Glue problems in summer
❌ high costs due to glues & bonders
❌ Cost of removal
All this is almost impossible with the Beamlight S6.
The UV LED lash curing method will completely change the lash industry in the coming months. Customers have already learned about the numerous benefits and are actively looking for studios that offer our new method. If you wait too long, you miss out on the potential and lose customers to the competition.
Our system is absolutely safe for you and your clients because there is no direct eye contact with the light. To eliminate any risk, we deliver our systems with certified UV400 safety glasses. By the way, you can also wear these over your own glasses without any problems.
Did you know? Before being launched on the market, our system went through dozens of tests and was successfully tested on hundreds of customers in our own beauty salons.
With the Beamlight S6 system you work super comfortable and faster than before. You trigger the light comfortably with a foot pedal. Due to the immediate hardening of the glue, you can go directly to the next natural lash and at the same time you are 100% sure that there is no glueing.
âś… Higher-quality work
âś… No glueings
âś… Significant reduction in treatment time
The Beamlight S6 system has a intentionally slim design. The stable base takes up little space and integrates perfectly into your workspace without getting in your way.
All the typical problems you had as a lash stylist before are now a thing of the past.
âś… Change glue dot? Only every few hours!
âś… Glue pulls threads? Never again!
âś… Strong fumes? Never!
âś… High glue consumption? Past!
âś… Spend a lot of money on bonders? Never again!
Our system is tested and safe! Before use, the operating instructions and all safety instructions must be read and observed. That’s it!
If you follow our safety instructions, it won’t hurt your eyes! You just have to make sure that neither you nor the customer look directly into the light. However, this does not happen when the system is used correctly, because the lamp shines from above onto the closed eyelid and never directly into the eye.
Also you as a stylist have no direct eye contact with the light and are additionally protected by our Beamlight UV400 safety glasses.
In short: Follow all the safety instructions printed in the operating instructions and you and your customer are safe!
Yes, our Beamlight system works with all types of lashes, regardless of brand. Whether Mink Lashes, Silk Lashes, Cashmere Lashes, Easy Fan Lashes, Flat Lashes, premade lash fans & Co!
You can remove the lashes as usual with a normal remover, don’t worry!
lashes that have grown out can be removed with tweezers as usual during refill. There is no difference from the classic lash extensions!
Our experience shows that up to 8 out of 10 clients who previously had an allergy and therefore could no longer wear lashes are symptom-free with our Beamlight System. This means that allergies no longer occur.
In rare cases, however, allergies do occur, and these are extremely sensitive customers. So there is no guarantee for “allergy-free”, but our system shows a high effectiveness with many female customers!
Although it is a UV LED system, our glue still contains cyanoacrylate. In the course of our extensive series of tests, we found that completely cyanoacrylate-free glues can be manufactured but perform poorly in practice. Curing would be more difficult and slower. Also, the room would have to be heavily darkened to prevent the glue dot from curing directly.
Our glue does not have these problems. Curing is lightning fast and the room does not need to be darkened either.
The lamp head should be about 10 – 15cm away from the natural lashes and the glue dot should be in the center of the light cone.
The light is triggered with a foot pedal, so you have both hands free for work.
The treatment of pregnant or breastfeeding persons may only be carried out after prior consultation with a doctor. In case of doubt, treatment should be avoided.
The system should not be used if the treated person has any of the following symptoms in the area of the eye where the light from the system may shine: abrasions, keloid – or unhealed scars, herpes, psoriasis, other infectious or inflammatory skin diseases, fungal infections, wounds, sunburn, neurodermatitis, skin cancer.
The system should not be used if the user or the person being treated has the following symptoms:
Thyroid disease, epilepsy, polymorphous light dermatosis, photosensitivity, radiation or chemotherapy, hemophilia. If an IPL or laser treatment has been performed in the treatment area in the past 21 days or if surgical procedures have been performed in the treatment area in the past 3 months.
The system should not be used if the user or the treated person is taking photosensitizing medication such as neuroleptics, systemic dermatics, antiepileptics, antihistamines, cytotoxic agents, antipsychotics, nonsteroidal anti-inflammatory drugs, light sensitizing agents (PDT), vitamin A derivatives (retinoids), or suffers from lupus erythematosus, photosensitive eczema in the treatment area, or albinism.
You can use common lash glue bases, but not transparent bases or bases made of glass. Daylight could be reflected through the glass and thus prematurely harden the glue dot.
The LEDs of the lamp last up to 30,000 hours.
Ethyl cyanoacrylate, Sodium stearate, Photoinitiator.
LASH GLUE FOR PROFESSIONAL LASH EXTENSION. NOT FOR PRIVATE USE. NOT SUITABLE FOR OPEN EYE APPLICATION.
MAY IRRITATE THE RESPIRATORY TRACT. CYANOACRYLATE. DANGER! READ LABEL BEFORE USE. GLUES SKIN AND EYELIDS TOGETHER WITHIN SECONDS. MAY IRRITATE THE RESPIRATORY TRACT. MUST NOT GET INTO THE HANDS OF CHILDREN. IN CASE OF CONTACT WITH EYES: RINSE GENTLY WITH WATER FOR SEVERAL MINUTES. REMOVE EXISTING CONTACT LENSES IF POSSIBLE. CONTINUE FLUSHING. SEEK MEDICAL ADVICE, KEEP PACKAGE WITH LABEL AT HAND. USE ONLY OUTDOORS OR IN WELL VENTILATED AREAS. KEEP UNDER LOCK AND KEY. DISPOSE OF CONTENTS / CONTAINER TO A RECOGNIZED WASTE DISPOSAL COMPANY. USE UP WITHIN 2 MONTHS. BEFORE USE: COVER THE OPENING AND SHAKE WELL. FOR PROFESSIONAL USE ONLY.
Show only reviews in English ()
You must be logged in to post a review.
There are no reviews yet.